Steering; Suspension - BRP can-am OUTLANDER 2021 Series Operator's Manual

MAINTENANCE PROCEDURES
WARNING
Never exceed tire's recommended
maximum pressure for seating
beads.

Steering

Steering Inspection
Tie-Rod Ends
Place vehicle on a level surface.
Apply parking brake.
Lift vehicle.
Secure vehicle on jack stands.
Inspect tie-rod boots for cracks.
Push and pull the wheels from the front
or rear edge to feel the play.
See an authorized Can-Am dealer if
there is an abnormal play or the boot is
cracked.
WARNING
The tie-rod end must be replaced if
the boot is cracked or shows an ab-
normal play.

Suspension

Front Suspension Lubrication
Lubricate front stabilizer bar bushing
and suspension arms at grease fit-
tings.
SUSPENSION GREASE
Scandinavia
All other
countries
______________
172
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
Rear Suspension Lubrication
Lubricate rear stabilizer bar links and
pivot bushing at grease fittings.
SUSPENSION GREASE
Scandinavia
All other
countries
Suspension Inspection
Shock Absorbers
Inspect shock absorber for oil leaks or
other damage.
Check tightness of fasteners.
See an authorized Can-Am dealer as
necessary.
Ball Joints
Place vehicle on a level surface.
Apply parking brake.
Lift vehicle.
Secure vehicle on jack stands.
Inspect ball joint boots for cracks.
Push and pull the wheels from the up-
per and lower edge to feel the play.
See an authorized Can-Am dealer if
there is an abnormal play or the boot is
cracked.
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)