Brakes - BRP can-am OUTLANDER 2021 Series Operator's Manual

tmo2011-001-131_a
TYPICAL
WARNING
The ball joint must be replaced if
the boot is cracked or it shows an
abnormal play.
Front Suspension Arms
Check suspension arms for cracks,
bending or other damage.
See an authorized Can-Am dealer as
necessary.
Rear Trailing Arms
Check trailing arms for distortion,
cracks or bending.
See an authorized Can-Am dealer if any
problem is detected.

Brakes

Brake Fluid Reservoir Level
Verification
With vehicle on a level surface, check
brake fluid in reservoirs for proper
level.
NOTE: A low level may indicate leaks
or worn brake pads.
Front Brake Reservoir Le vel
Verification
Turn steering in the str aight-ahead po-
sition to ensure reservoir is level.
Check the brake fluid level, the reser-
voir is full when the fluid reaches of the
top of window.
Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace if
damaged.
vmo2012-012-046_a
TYPICAL
Rear Brake Reservoir Level
Verification
Remove the seat.
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of brake pedal fluid reser-
voir.
vmo2012-012-035_a
1. Rear brake fluid reservoir
Adding Brake Fluid
Clean filler cap.
______________
MAINTENANCE PROCEDURES
173