MAINTENANCE PROCEDURES
Vmr2012-018-003_a
CVT COVER TIGHTENING SEQUENCE
TIGHTENING TORQUE
CVT cover
screws
Drive Belt
Removing the Drive Belt
NOTICE
In case of a drive belt fail-
ure, the CVT, cover, drain reservoir
and air outlet must be cleaned and
inspected for obstruction.
CVT COVER
Remove
Open driven pulley.
REQUIRED TOOL
PULLER/LOCKING
TOOL
(P/N 529 036 098)
Screw tool in the threaded hole of
driven pulley and tighten to open the
pulley.
______________
162
7 N•m ± 0.8 N•m
(62 lbf•in ± 7 lbf•in)
.
Vmr2012-018-005_a
1. Puller/locking tool
2. Fixed sheave of driven pulley
Slide the belt over the top edge of fixed
sheave to remove it.
Vmr2012-018-006_a
Installing the Drive Belt
For installation, reverse the removal
procedure. Pay attention to the follow-
ing details.
The maximum drive belt life span is
obtained when the drive belt has the
proper rotation direction. Install it
so that the arrow printed on belt is
pointing towards front of the vehicle,
viewed from top.