BRP can-am OUTLANDER 2021 Series Operator's Manual page 176

Table of Contents

Advertisement

MAINTENANCE PROCEDURES
WARNING
Clean filler cap before removing.
Remove screws retaining the reservoir
cap.
Remove reservoir cap.
Add fluid as required using a clean fun-
nel. Do not overfill.
NOTICE
Brake fluid can damage
plastic and painted surface. Wipe
off and clean any spillage.
Reinstall reservoir cap and tighten
screws.
NOTE: Ensure filler cap diaphragm is
pushed inside the cap before closing
the brake fluid reservoir.
Recommended Brake Fluid
Always use DOT 4 brake fluid from a
sealed container.
WARNING
To avoid damage to the braking
system, do not use other brake
fluid types.
Brake Inspection
CAUTION The brakes can be
very hot after prolonged use of the
vehicle and can cause burns. Wait
for the brakes to cool down.
The brake inspection, maintenance
and repair should be performed by an
authorized Can-Am dealer.
However, verify the following between
visits to your dealer:
– Brake fluid level
– Brake system for fluid leaks
– Brake cleanliness.
______________
174
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Can-am outlander 650 2021Can-am outlander 850 2021Can-am outlander dps 650 2021Can-am outlander dps 850 2021Can-am outlander xu 650 2021Can-am outlander xt 650 2021 ... Show all

Table of Contents