BRP can-am OUTLANDER 2021 Series Operator's Manual page 47

ITEMS TO BE
INSPECTED
Cargo
Storage
compartment
Chassis and
suspension
Engine air filter
CVT air filter
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
Multifunction gauge
Lights
Fuel level
Horn
________
INSPECTION TO PERFORM
If you transport a cargo, respect the load capacity.
LOADING THE CARGO RACKS
Refer to
Ensure cargo is properly secured to the racks
If you are pulling a trailer or another equipment:
– Check hitch and trailer ball condition
– Respect the tongue capacity and towing capacity as
indicated on the label affixed to the hitch or refer to
SPECIFICATIONS
– Ensure trailer is properly secured to hitch.
Check if rear storage compartment is properly latched
Check underneath vehicle for any debris on chassis or
suspension components and clean them properly
Inspect and clean engine air filter
Inspect and clean CVT air filter
INSPECTION TO PERFORM
Check operation of indicator lamps in multifunction gauge
(during first few seconds of key ON)
Check for messages on multifunction gauge
Check operation and cleanliness of headlights and taillight
Check operation of low and high beams
Check operation of brake light
Check the fuel level.
Check operation of the horn (If equipped)
SAFETY INFORMATION
PRE-RIDE INSPECTION
.
________
✔
✔
45