Footpegs; Operator's Heated Grips (If Equipped) - BRP can-am OUTLANDER 2021 Series Operator's Manual

vmo2013-007-007_a
TYPICAL
1. Latch
3. Remove glove box.
4. Reinstall passenger's seat. Refer to
PASSENGER'S SEAT

4) Footpegs

The operator footpegs are located on
the RH and LH side of the vehicle.
1-UP Models
vmo2012-012-019_a
TYPICAL - 1-UP SHOWN
1. Operator's LH footpeg
WARNING
Operator must have both feet on
footpegs at all times during vehi-
cle operation.
2-UP Models
The passenger footpegs are located on
the RH and LH side of the vehicle be-
hind the operator footpegs.
in this section.
______________
vmo2013-007-010_a
TYPICAL - 2-UP SHOWN
1. Operator's LH footpeg
2. Passenger's LH footpeg
WARNING
Passenger must have both feet on
footpegs at all time during vehicle
operation.
5) Operator's Heated
Grips (If Equipped)
The heated grips have 4 levels of heat.
The heat level is indicated by LEDs
above the switch. No LED lit indicates
that the heated grips are off.
219001854-002_b
1. LED heat level
Press the switch once to turn on.
EQUIPMENT
115