Section 5
Local HMI
IEC13000280-1-en.vsd
GUID-94AF2358-6905-4782-B37B-ACD3DCBF7F9C V1 EN-US
Figure 39:
1 RJ-45 connector
2 Green indicator LED
The default IP address for the IED front port is 10.1.150.3 and the corresponding subnetwork mask is
255.255.255.0. It can be set through the local HMI path Main menu /Configuration/Communication /
Ethernet configuration/FRONT port /AP_FRONT.
90
2
1
RJ-45 communication port and green indicator LED
Ensure not to change the default IP address of the IED.
Do not connect the IED front port to a LAN. Connect only a single local PC with PCM600
to the front port. It is only intended for temporary use, such as commissioning and
testing.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
1MRK 505 370-UUS Rev. K
Busbar protection REB670
Application manual