ABB Relion 670 Series Applications Manual page 364

Section 13
Logic
13.2.2 Application
Group alarm logic function ALMCALH is used to route alarm signals to different LEDs and/or output
contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to physical
tripping outputs according to the specific application needs.
13.2.3 Setting guidelines
Operation: Enabled or Disabled
13.3 Logic for group alarm WRNCALH
13.3.1 Identification
Function description
Logic for group warning
13.3.1.1 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output contacts
on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning signal
to physical tripping outputs according to the specific application needs.
13.3.1.2 Setting guidelines
Operation Enabled or Disabled
13.4 Logic for group indication INDCALH
13.4.1 Identification
Function description
Logic for group indication
13.4.1.1 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs and/or
output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication signal to
physical outputs according to the specific application needs.
358
IEC 61850
identification
WRNCALH
IEC 61850
identification
INDCALH
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
1MRK 505 370-UUS Rev. K
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
Busbar protection REB670
Application manual