1MRK 505 370-UUS Rev. K
current status of the switch, such as blocking, selection, position, operating capability and operation
counter.
Since different switches are represented differently on IEC 61850, the data that is mandatory to model in
IEC 61850 is mandatory inputs and the other useful data for the command and status following is
optional. To make it easy to choose which data to use for the XLNPROXY function, their usage is
controlled by the connection of each data's signal input and valid input. These connections are usually
from the GOOSEXLNRCV function (see Figure
IEC16000071 V1 EN-US
Figure 143: Configuration with XLNPROXY and GOOSEXLNRCV where all the IEC 61850
Busbar protection REB670
Application manual
modelled data is used, including selection
© 2017 - 2021 Hitachi Power Grids. All rights reserved
143
and Figure 144).
Section 12
Control
307