Polaris General 2020 Service Manual page 354

TRANSMISSION
2%
20. Remove two screws
2^
shift fork and torsion spring out of transmission
housing.
2&
21. Remove the screws
assembly.
NOTICE
Note the longer screw
22. Lift the pinion shaft assembly
it from the housing.
23. Inspect all gear and shaft assemblies for damage.
24. Check the bearings for damage and that they are
easy to turn. Replace any questionable bearings.
7.24
and retaining plates, then lift
that secure the pinion shaft
2*
that locks the snorkel tube.
2(
straight up to remove
25. To disassemble the shift shaft rail remove the snap
3)
ring from the end of the shift rail on either side.
Use caution when disassembling the shift rail. The
compressed springs on the shift rail may pop off
causing eye or face injury.
26. Remove all seals from the gearcase halves and clean
the cases in preparation for assembly.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
CAUTION
© Copyright Polaris Inc.