Polaris General 2020 Service Manual page 511

39. Apply heat with a propane torch to the bottom of
shock eyelet.
40. Remove eyelet using an adjustable wrench or Body
Cap socket.
CAUTION
Eyelet will be Hot.
41. Remove Loctite® residue out from threads of the
eyelet and shock shaft.
EYELET-MOUNTED REBOUND ADJUSTER
1. For shocks with , remove Jet/Check Valve with Hex T-
handle wrench.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
STEERING / SUSPENSION
2. Push needle out of shock shaft using a metering rod
and Hex T-handle wrench.
3. Remove O-ring from needle.
4. Back out rebound adjuster with flat head screw driver,
but do NOT fully remove rebound adjuster yet.
9
9.67