Polaris General 2020 Service Manual page 169

21. Remove the four front engine mounting bolts
1(
nuts .
22. With the help of an assistant and the engine hoist,
raise the engine vertically out of the vehicle frame.
CAUTION
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.
23. Remove the starter motor bolts
from the engine.
24. Remove the six transmission joint bracket bolts
and transmission joint bracket
25. Install the engine stand adapter (PU-50562 page
onto the engine where the starter motor was located.
26. Select the proper engine stand sleeve adapter and
install it onto the engine stand adapter.
• Sleeve adapter for a 2" bore engine stand:
(PU-50625)
• Sleeve adapter for a 2.375" bore engine stand:
(PW-47054)
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
l
and 27. Place engine onto the engine stand (PU-50624) for
2)
and starter motor
2!
2@
from the engine.
)
ENGINE / COOLING SYSTEM
service.
3
3.15