Polaris General 2020 Service Manual page 316

PVT SYSTEM
SHIFT WEIGHT INSPECTION
1. Remove shift weight fasteners
Inspect the contact surface of the weight
surface should be smooth and free of dents or gall
marks. Inspect the weight pivot bore
wear or galling. If weights or bolts are worn or
broken, replace in sets of three with new bolts and
nuts.
The clutch assembly is a precisely balanced unit. Never
replace parts with used parts from another clutch
assembly!
NOTICE
A damaged shift weight is usually caused by a
damaged or stuck roller in the spider assembly. See
"Drive Clutch Roller Pin and Button Service".
6.16
e
and weights .
q
w
and bolts for
WARNING
BUTTON TO TOWER CLEARANCE
INSPECTION
. The
1. Inspect the button to tower clearance as shown.
Replace the drive clutch if clearance is beyond
specification.
Button to Tower Clearance:
2. Inspect the tower sheave surfaces. Replace the drive
clutch if worn, damaged or cracked.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
MEASUREMENT
.000-.012" (.000-.304 mm)
© Copyright Polaris Inc.