4. Insert upper control arm ball joint end into the bearing
carrier. Install upper ball joint pinch bolt
bearing carrier and torque bolt to specification.
TORQUE
Ball Joint Pinch Bolts:
42 lb-ft (57 Nm)
5. Install brake line mounting brackets
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
6. Attach shock to control arm with fastener. Torque
t
into the
lower shock bolt to specification.
7. Attach stabilizer link to control arm with fastener.
y
.
Torque to specification
8. Install NEW ball joint into control arm. Refer to "Ball
Joint Installation" page 9.52 procedure.
STEERING / SUSPENSION
TORQUE
Shock Mount Fasteners:
20 lb-ft (27 Nm) + 90°
TORQUE
Stabilizer Bar Link Fastener:
42 lb-ft (57 Nm)
9
9.31