Brake Light Switch Adjustment; Spark Plugs - BOMBARDIER Alpine 1987 Operator's Manual

Metal thickness
not included
Brake pad
min. thickness
3 mm (1/8")
Brake adjustment
The brake mechanism is a self-adjusting
type. If a quicker brake response is desir-
ed, strongly pull the brake lever several
times, this will actuate the self adJuSting
mechanism.
Strongly pull
A008006002
0
NOTE: The next inspection must
be done on each brake lever.
After the adjustment, brake should ap-
ply fully when lever is approximatively
13 mm
(1/2")
from handlebar grip. If
not, do not tamper with the brake, con-
tact your servicing dealer.
Brake light switch adjustment
The brake light switch is not adjustable
on this vehicle and is part of the brake
handle assembly.
A017006006
Brake light
switch
Spark plugs
Disconnect spark plug wires.
Open access door and remove air vents
(located on top of console). Unscrew
spark plugs using the socket and ex-
tension supplied in tool k1t.
Press here
and pull upwards to remove vents
A002007004
Check condition of spark plug:
• A brownish tip reflects ideal condi-
tions. (Carburetor adjustment, spark
plug heat range, etc.; are correct).
• A black insulator tip indicates fouling
caused by; carburetor idle speed mix-
ture and
I
or high speed mixture too
rich, incorrect gas mixture ratio,
wrong type of spark plug (heat range),
or excessive idling.
_______________________ 25