Update And Restore; Firmware Update; Preparing Installation; Executing Setup - R&S TSMA6 Series User Manual

®
R&S TSMA6

7 Update and Restore

7.1 Firmware Update

7.1.1 Preparing Installation

Firmware update packages for the R&S TSMA6 can be downloaded from the Rohde &
Schwarz web page https://www.rohde-schwarz.com/us/firmware/tsmx/. The firmware
setup file can be found under the title R&S TSMAx Firmware V ww.xx.yy.zz.
There are several ways how to install firmware and software components on the
R&S TSMA6. Select the preferred way.
For software installations (NESTOR, ROMES, DiversityProbe for QualiPoc ), use only
the TSMA6-specific setup files (TSMA6-<AppName>-|<version>-setup.exe).

7.1.2 Executing Setup

7.1.2.1

Local Execution of the Setup File

1. Connect mouse and keyboard to USB ports and a monitor to the HDMI port. The
setup file must be available on the R&S TSMA6 or on a USB stick.
2. Switch on the R&S TSMA6 via the power button.
3. Copy the setup file.
a) For firmware installation:
b) For software installation:
4. Check that R&S TSMA6 is in "PC Mode", see
Operation",
5. Open the Windows Explorer and execute the setup file
TSMAx-Setup-<Version>.exe.
6. The "R&S Software Distributor" comes up. Select "Local Installation" and press
"Next >".
User Manual 4900.8057.02 ─ 06
Copy the firmware setup file TSMAx-Setup-<Version>.exe into a tempo-
rary directory on the local disk of the R&S TSMA6.
Copy the corresponding setup file into a temporary directory on the local disk of
the R&S TSMA6.
on page 63.
Update and Restore
Firmware Update
Chapter 7.1.4, "Checking Mode of
53