®
R&S
TSMA6
7 Update and Restore
7.1 Installation Overview
In general, there are three possibilities to install firmware and software components on
the R&S TSMA6.
●
Run setup "Local"
●
Run setup "Remote"
For software installations (NESTOR, ROMES, QualiPoc), use only the TSMA6-specific
setup files (TSMA6-<AppName>-|<version>-setup.exe).
7.1.1 Local Installation
The device must be in the PC Mode. Check it via the Web-GUI ("Overview" > "Mode of
Operation"
To change the operation mode, see
1. Connect mouse and keyboard to USB ports and a monitor to the HDMI port. The
setup file must be available on the R&S TSMA6 or on a USB stick.
2. Open the Windows Explorer and start the dedicated TSMA6 setup file.
3. The "R&S Software Distributor" comes up. Select "Local Installation" and press
"Next >".
User Manual 4900.8057.02 ─ 01
"Mode of Operation"
on page 74).
Update and Restore
Installation Overview
35