®
R&S
TSMA6
Figure 6-2: WLAN AP Settings
2. Switch on WLAN on the tablet/smartphone.
3. Connect the tablet/smartphone with the R&S TSMA6 WLAN AP. See
ter 6.1.1, "Start the R&S TSMA6
Measurement with the rViCom Sample App
To run measurements, the requirements for operating the rViCom Sample App have to
be fulfilled, see
1. Activate the rViCom Server mode (see
on page 27).
2. Start one of the following applications.
a) Start the OEM rViCom client application on the mobile device.
b) Start the rViCom Sample App on the mobile device.
6.3.2 QualiPoc Mode
To use the R&S TSMA6 with QualiPoc
Prerequisites
●
The appropriate scanner license must be installed on the QualiPoc
device.
●
On the R&S TSMA6, Bluetooth
●
The "Mode of Operation" must be set to "QualiPoc".
User Manual 4900.8057.02 ─ 01
Chapter B.2.1, "General
For more details, see
Chapter B.3,
Configuring the R&S TSMA6
Web-GUI",
on page 24.
Requirements",
on page 84.
Chapter 6.2, "Measurement
"Usage",
on page 85.
®
, the following steps must be performed.
®
must be activated and visible (see
Measurement Modes
Chap-
Setup",
®
handheld
Figure
6-1).
29