Qualipoc Mode - R&S TSMA6 Getting Started

®
R&S TSMA6
The connection between the Remote ViCom server on the R&S TSMA6 and the
client application (Remote ViCom client) on the handheld device can be realized
®
via Bluetooth or WLAN.
The selection of the wireless interface type depends on the measurement task.
The WLAN connection allows a data throughput, which is about 10 times
higher compared to Bluetooth
The Bluetooth
Prerequisites
● Bluetooth connection only
See Chapter 6.5, "Bluetooth
● WLAN connection only
Connect the tablet/smartphone with the R&S TSMA6 WLAN AP. See
ter 4.5, "Connecting with R&S TSMA6 WLAN Access
Measurement with the rViCom sample App
To run measurements, the requirements for operating the rViCom sample App
have to be fulfilled, see R&S TSMA6 user manual.
1. Activate the rViCom server mode (see
Mode", on page 31).
2. Start one of the following applications.
a) Start the OEM rViCom client application on the mobile device.
b) Start the rViCom sample App on the mobile device.
For more details, refer to R&S TSMA6 user manual.
6.3.3

QualiPoc Mode

The QualiPoc mode is only displayed if the QualiPoc setup has been execu-
ted (see R&S TSMA6 user manual).
Prerequisites
Getting Started 4900.8040.02 ─ 07
®
®
connection is less influenced by radio interference.
®
Pairing",
Configuring the R&S TSMA6
.
on page 42.
Chapter 6.2, "Selecting Measurement
Measurement Modes
Chap-
Point", on page 18.
33