Wlan Ap; Subnet Mask (Wlan Client); Default Gateway (Wlan Client); Dns Servers(S) (Wlan Client) - R&S TSMA6 Series User Manual

®
R&S TSMA6
Subnet Mask (WLAN Client) ← WLAN Adapter
Specify the subnet mask for the R&S TSMA6
Default Gateway (WLAN Client) ← WLAN Adapter
Specify the default gateway.
DNS Servers(s) (WLAN Client) ← WLAN Adapter
Specify the DNS server. It is possible to specify a primary and a secondary DNS
server.
A.2.2.3

WLAN AP

In the "WLAN AP" tab, the WLAN access point settings can be configured.
Changing SSID and network key is only possible with local access or LAN access to
the web GUI.
WLAN Access
WLAN Access Point
Specify the configuration details for the WLAN access point.
Note: The configuration of the WLAN access point is only possible, if the WLAN switch
of the device is "On" (see
Status (WLAN AP) ← WLAN Access Point
The WLAN access point can be switched on or off. When WLAN is switched to "Off", it
can be selected, if this setting is permanent (resists restart) or only for the current ses-
sion (WLAN AP On after restart).
On
Off
SSID ← WLAN Access Point
Enter the SSID.
Network Key ← WLAN Access Point
Enter the network key for the specified SSID and press "Submit".
Confirm the network key in the following prompt.
User Manual 4900.8057.02 ─ 06
Point.................................................................................................... 127
└ Status (WLAN AP)........................................................................................ 127
└ SSID..............................................................................................................127
└ Network Key..................................................................................................127
"WLAN/Bluetooth ON/OFF"
The WLAN AP remains switched off after a restart.
The WLAN AP is switched on again after a power cycle.
Note: The WLAN switch must be set to "On".
Usage of the Web GUI
Configuration
on page 13).
127