Wlan Ap; Lan - R&S TSMA6 User Manual
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6:
- User manual (155 pages) ,
- Getting started (51 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
A.2.2.3
WLAN AP
The "WLAN AP" tab is used to recall and configure settings of the WLAN access point.
WLAN Access
WLAN Access Point
Specify the configuration details for the WLAN access point.
Note: The configuration of the WLAN access point is only possible, if the WLAN switch
of the device is "On" (see
Status (WLAN AP) ← WLAN Access Point
Status = On
Status = Off and
Permanent = Off
Status = Off and
Permanent = On
SSID ← WLAN Access Point
Enter SSID and network key and press "Submit" to change the default settings.
●
Default SSID: TSMA6B-<DeviceSerialNumber>
●
Default Key: instrument
Current Network Key ← WLAN Access Point
Enter the current valid network key for the specified SSID.
New Network Key ← WLAN Access Point
Enter a new network key for the specified SSID
Confirm Network Key ← WLAN Access Point
To confirm the new network key, enter it again.
A.2.2.4
LAN
Configure the "LAN" port IP of the R&S TSMA6. This is the port marked with the LAN
symbol.
LAN
User Manual 4900.8057.02 ─ 11
Point.................................................................................................... 163
└
Status (WLAN
AP)........................................................................................ 163
└ SSID..............................................................................................................163
└
Current Network
Key.....................................................................................163
└
New Network
Key......................................................................................... 163
└
Confirm Network
Key.................................................................................... 163
"WLAN/Bluetooth on/off"
The WLAN AP is on.
The WLAN AP is switched off for the current session. After the next power cycle, the
WLAN AP is switched on again.
The WLAN AP is permanently switched off even after a power cycle.
Connection.......................................................................................................... 164
└
State
(LAN)................................................................................................... 164
└
R&S TSMA6TCP/IP Mode
on page 33).
(LAN)..................................................................164
Web GUI reference
Configuration
163
Advertisement
Table of Contents
