Install The Spm - Oracle SPARC T8-1 Service Manual

b. Lift the SPM up and away from the motherboard (panel 2).
5. Install a new SPM.
See "Install the SPM" on page
Related Information
"SPM Firmware and Configuration" on page 121
■
"Install the SPM" on page 123
■

Install the SPM

You can perform this cold-service procedure. The server must be completely powered down
before performing this procedure. See
information about this category of service procedures.
Remove a defective SPM or remove the SPM you will install in a new
1.
motherboard.
See "Remove the SPM" on page
123.
"Component Service Categories" on page 43
122.
Install the SPM
for more
Servicing the SPM 123