Oracle SPARC T8-1 Service Manual page 140

Install the Motherboard
9. Install DIMMs on the motherboard.
Place each DIMM in the same motherboard slot where it had been before.
10. Install the SPM on the motherboard.
Use the SPM you removed from a motherboard. See
Remove the eUSB device that comes with the new motherboard, and install it
11.
onto the old motherboard.
Install the eUSB drive that you removed from the old motherboard onto the new motherboard.
See "Remove the eUSB Drive" on page 113
Install the SC PROM on the motherboard.
12.
Use the SC PROM you removed from a motherboard.
13. Install any memory risers.
140 SPARC T8-1 Server Service Manual • January 2022
"Install the SPM" on page
and "Install the eUSB Drive" on page
123.
115.