Oracle SPARC T8-1 Service Manual page 97

DIMMs are installed:
When adding memory
■
When replacing faulty
■
When replacing a faulty
■
You can perform this procedure, but the server must first be completely powered down and all
power cords unplugged. See
about cold-service procedures.
Whenever you remove a DIMM, you should replace it with another DIMM before
Caution -
applying power to the server. Otherwise, the server might overheat due to improper airflow.
1. Attach an antistatic wrist strap.
Then unpack the DIMMs and place them on an antistatic mat.
to the server.
DIMMs.
motherboard.
"Component Service Categories" on page 43 for more information
Servicing Memory Risers and DIMMs
Install a DIMM
97