Return The Server To The Normal Operating Position - Oracle SPARC T8-1 Service Manual

Return the Server to the Normal Operating Position

Return the Server to the Normal Operating Position
Caution -
set it in the rack.
Release the slide rails from the fully extended position by pushing the release
1.
tabs on the side of each rail.
2. While pushing on the release tabs, slowly push the server into the rack.
Ensure that the cables do not get in the way.
Reconnect the cables to the rear of the server.
3.
If the CMA is in the way, disconnect the left CMA release and swing the CMA open. See
"Release the CMA" on page
Reconnect the CMA.
4.
Swing the CMA closed and latch it to the left rack rail. Refer to
Server" in SPARC T8-1 Server Installation
158 SPARC T8-1 Server Service Manual • January 2022
The chassis is heavy. To avoid personal injury, use two people to lift the server and
51.
"Attach the CMA to the
Guide.