Event List - JUMO mTRON T Operating Manual

2 Process screen operation
2.3.10

Event list

The last 150 events are listed in the central processing unit event list with dates and times. The
events include:
• Events, such as, configuration change, status change of a program generator (start, pause,
abort, section change), limit value violation, system status change (RUN, STOP), power on/
off
• Malfunctions, such as module failure
• System collective alarm
The event list is called up via the button (symbol) in the status bar
Status bar symbols and buttons
Symbol/But-
ton
NOTE!
The "acknowledgement" function is only available when a user is logged on and acknowl-
edgement rights have been assigned to him/her.
38
Meaning/Function
No new event in the event list
Tap the symbol to open the event list.
New event on the event list (event or malfunction)
Tap the symbol to open the event list.
A single event cannot be acknowledged. After closing the event list, the symbol will
turn blue again.
If it concerns a malfunction, this can be acknowledged, resulting in a "malfunction
acknowledged" entry. But even if there is no acknowledgement, the event list symbol
will turn blue again after it is closed.
Collective alarm
Tap the symbol to open the event list, acknowledge the alarm, and the symbol will turn
blue again. If the event list is closed without acknowledgement, the symbol will remain
red.
The acknowledgement is listed as a new "acknowledged collective alarm" entry in the
event list.