S-Parameters (Scattering Matrix, Optional) - Teledyne T3SP Series Operator's Manual

•
Multiple samples can be plotted by selecting rows in the sample list
while pressing down the CTRL-key.
•
A quick way to create a rectangular tolerance mask is to use the menu
item Extras Set x/y-Axis in selected Samples.
•
User-defined tolerance masks can be used for pass/fail analysis. Use
the Impedance Measurement Properties Window for loading a seg-
mented tolerance mask (see also section 5.1.4). An example tolerance
mask can be found in the Examples subdirectory.
Please note: masks are only applicable to magnitude and VSWR traces.
•
Smoothing of the traces (see section 6) can be activated via the Ad-
vanced tab in the Options Dialog (see section 2.5.4).
•
The results can be exported to various formats (e.g. Excel, CSV, Mat-
lab, and Touchstone) via the menu entry File
•
The frequency axis can be adjusted by changing to the Result Visual-
ization Window and pressing the shortcut ALT-F or via the menu item
View S-Parameter
stored in the Project Files.

5.3 S-Parameters (Scattering Matrix, optional)

The Full 2-Port mode (F2P) is an optional measurement mode for measuring
the frequency dependent S
is essential to perform a twelve-term calibration (12TC) before using this
mode (detailed information about performing a 12TC calibrations can be
found in chapter 4).
1 S is an abbreviation for S
XY
Change Frequency. The frequency setting is
1
-parameters
XY
, S , S , S
11 12 21 22
T3SP-Series Operator's Manual
Export.
for single-ended 2-port DUTs. It
57
931776 RevE