Default Set; Default Set List Of Items - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > DEFAULT SET
Model JV300-130/160 Issued 2014.05.30 Revised

4.2.5 DEFAULT SET

 Function
Returning each parameter to the initial value.
 DEFAULT SET List of Items
No Item
1 SYSTEM PARAMETER Initialize the parameter in question.
2 MAINTE PARAMETER Initialize the parameter in question.
3 SERVO PARAMETER
4 FEED PARAMETER
5 HEAD PARAMETER
6 OPE PARAMETER
7 INK PARAMETER 1
8 INK PARAMETER 2
9 DEBUG PARAM
10 SCAN PARAMETER
11 NOZLE RECOCVERY
PARAM
12 SHIPPING set
 Work Procedures
FUNCTION
#ADJUST [ENT]
#ADJUST
DEFAULT SET [ENT]
#DEFAULT SET
SYSTEM param. [ENT]
MAINTE PARAMETER
SERVO PARAMETER
:
#DEFAULT SET
INITIAL. OK? [ENT]
Parameter initialized
© 2014 MIMAKI ENGINEERING CO.,LTD.
Operation
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initializing parameters of others than the adjustments.
1. Select [#ADJUST] - [DEFAULT SET].
2. Select the parameter to be initialized, and then fix it by [ENTER].
[] / []: Switch
[ENTER]: Confirms (to Confirmation display)
[END]: Return
3. Initialize by [ENTER].
[ENTER]: Execute
[END]: Return
F/W ver. 1.00 Remark
Rev.
1.0
Remarks
1
2
3
4
5
6
7
8
4.2.5 R.1.0 P.1