Wiper Cleaner Assy. - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Wiper Cleaner Assy.
Model JV300-130/160 Issued 2014.05.30 Revised

6.3.7 Wiper Cleaner Assy.

 Work procedures
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Remove fitting
Wiper cleaner Assy.
© 2014 MIMAKI ENGINEERING CO.,LTD.
Wiper cleaner Assy.
Wiper unit
1. Remove the following covers.
• Front cover M, L
2. Remove the fitting.
Push
3. Remove the Wiper cleaner Assy. by pushing the stopper and
slide it.
4. Reverse the disassembly procedure for reassembly.
F/W ver 1.00 Remark
Make sure that O-ring (F seal rubber 300) is not
remaining in the joint screws.
Take care not to contaminate the surroundings with
ink.
Rev.
1.0
1
2
3
4
5
6
F seal rubber 300
7
8
6.3.7 R.1.0 P.1