Take-Up Motor - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Take-up Motor
Model JV300-130/160 Issued 2014.05.30 Revised

6.3.8 Take-up Motor

 Work procedures
Take-up motor BKT1
Take-up motor
© 2014 MIMAKI ENGINEERING CO.,LTD.
Take-up motor
1. Remove the Take-up cover.
2. Disconnect all connectors. (for sensor x2, for motor x1)
3. Remove the Take-up motor together with the Take-up motor
BKT (screw x3).
Take-up motor
4. Remove the screws (x4) and then remove the Take-up motor.
5. Reverse the disassembly procedure for reassembly.
F/W ver 1.00 Remark
Rev.
1.0
1
2
3
4
5
6
7
8
6.3.8 R.1.0 P.1