Sensor; List Of Sensor Test - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Test Items > Test Function > SENSOR
Model JV300-130/160 Issued 2014.05.30 Revised

5.1.2 SENSOR

 Outline
Each sensor is tested.
 List of SENSOR TEST
Name of Test
COVER Displaying the status of the Cover Sensor.
(The identification by the cover name is not possible.
Because each cover sensor for series connection.)
Y ORIGIN Displaying the status of the Y-origin Sensor.
LEVER Displaying the status of the Clamp Lever.
REAR PAPER Displaying the status of the Rear Paper Sensor.
WIPER Displaying the status of the Wiper Origin Sensor.
WASH CARTRIDGE Displaying the status of the Wash Cartridge Sensor.
WASH CART. END Displaying the status of the Wash Cartridge Near End Sen-
sor.
HEAD(UPSIDE) Displaying the status of the Ink Head.
HEAD(DOWN- Displaying the status of the Ink Head.
SIDE)
MEDIA JAM Displaying the status of the Media Jam Sensor.
CLEANER Displaying the status of the Cleaner.
PUMP MOTOR Displaying the status of the Pass Select Sensor.
TAKE-UP Displaying the status of the Take-Up Motor.
TENSION BAR Displaying the origin status of the Angle Sensor.
SLIT COUNT A Displaying the slit count status of the Angle Sensor.
SLIT COUNT B Displaying the slit count status of the Angle Sensor.
TORQUE LIMITTER Torque limit sensor condition of the take-up motor.
© 2014 MIMAKI ENGINEERING CO.,LTD.
F/W ver
Function
1.00 Remark
LCD display
OPEN/CLOSE
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF (For 300 series only)
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Rev.
1.0
1
2
3
4
5
6
7
8
5.1.2 R.1.0 P.1