MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Valve Assy
Model
JV300-130/160
Issued 2014.05.30 Revised
6.2.10 Valve Assy
Ink Cartridge Solenoid Assy x8
Valve Assy x8
Work procedures
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
C link lever
To connector
Screw
C valve base
© 2014 MIMAKI ENGINEERING CO.,LTD.
1. Execute [#ADJUST] — [HEAD WASH] to discharge the ink.
(Refer to 4.2.8)
2. Remove the Cartridge rear cover.
3. Remove snap pin A and then the C link lever.
Snap pin A
4. Removes two screws to take off the C valve base together with
the solenoid.
5. Remove the cable connector.
F/W ver
1.00
Remark
Rev.
1.0
1
2
3
4
5
6
7
8
6.2.10
R.1.0
P.1