MAINTENANCE MANUAL > Test Items > Test Function > CHECK ENCODER
Model
JV300-130/160
Issued 2014.05.30 Revised
5.1.12 CHECK ENCODER
Outline
Checks the operation of the linear encoder and the motor encoder by moving the slider.
Content
"M: xxx E: xxx" is displayed on the lower row of the LCD. The coordinate value of the motor encoder is displayed in
M, and that of the linear encoder is displayed in E in units of mm.
With[] []key, you can move the slider to right and left.
© 2014 MIMAKI ENGINEERING CO.,LTD.
F/W ver
1.00
Remark
Rev.
1.0
1
2
3
4
5
6
7
8
5.1.12
R.1.0
P.1