Drop.pos; Wf4(Large Droplet Waveform); Wf3(Small Droplet Waveform) - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > DROP.POS
Model JV300-130/160 Issued 2014.05.30 Revised

4.2.3 DROP.POS

 Outline
Draw the built-in patterns, and compensate the parameter so that the drop positions of other heads are on the same
line as the drop position of reference head (Head 1A) in the Y-direction. To each of the discharged waveforms, exe-
cute [SiDir], [ReDir] and [BiDir] in each resolution.Perform adjustment in accordance with the following chart.

WF4(Large droplet waveform)

360
BiDir
Std *1
O
Hi X
*1: The adjustment value for WF4/720dpi Hi is reflected in the WF4/360dpi Std single and reverse direction adjustment val-
ues (excluding bidirectional).

WF3(Small droplet waveform)

360
BiDir
Std O
Hi X
*2: The adjustment value for WF3/720dpi Std is reflected in the WF3/1440dpi Hi single and reverse direction adjustment val-
ues (excluding bidirectional).
 Work Procedures
FUNCTION
#ADJUST [ENT]
#ADJUST
PRINT ADJUST [ENT]
#PRINT ADJUST
:WF3
WF4
#PRINT ADJUST
:360Std
360Std - 720Hi
© 2014 MIMAKI ENGINEERING CO.,LTD.
540
SiDir ReDir BiDir
  
O O O
540
SiDir ReDir BiDir
  
O O O
1. Set Media at X-origin.
2. Select [#ADJUST] - [PRINT ADJUST].
3. Select the waveform.
4. Select the Y-resolution and scanning speed.
F/W ver. 1.00 Remark
Y-resolution
720
SiDir ReDir BiDir
X X X
O O X
Y-resolution
720
SiDir ReDir BiDir
O O 
O O O
Set the drawing origin as follows;
(Set in [LOCAL] -> [ORIGIN
X  0, Y > 0
[] / [] : Switches
[ENTER] : Confirms (Next)
[] / [] : Y-resolution & Scanning speed change
[ENTER] : Confirms (Next)
1440
SiDir ReDir BiDir
X X X
X X X
1440
SiDir ReDir BiDir
  
O
*2 *2
X X
SET])
4.2.3 R.1.0
Rev.
1.0
1
2
3
4
5
6
7
8
P.1