MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Cutter Unit
Model
JV300-130/160
Issued 2014.05.30 Revised
6.2.11 Cutter Unit
Work procedures
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Screw x2
Connector
© 2014 MIMAKI ENGINEERING CO.,LTD.
Cutter Unit
1. Turn the main power OFF.
2. Remove the Front cover M and L.
3. Move slowly the carriage onto the platen by hand.
4. Loosen the screws (x2) and remove the Cutter unit.
Cutter unit
5. Remove the connector.
6. Install using the reverse of the disassembly procedure.
7. Refer to
adjustments.
F/W ver
1.00
Remark
4.3.2
for more information on installation position
Rev.
1.0
1
2
3
4
5
6
7
8
6.2.11
R.1.0
P.1