Replacement Of The Linear Encoder Scale - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Workflow > Driving Parts > Replacement of the Linear Encoder Scale
Model JV300-130/160 Issued 2014.05.30 Revised

3.2.4 Replacement of the Linear Encoder Scale

 List of replacement procedures
Item

Covers Removal of covers, etc.
1.
Linear  Removal of the linear encoder scale. Remove the linear encoder scale.
2.
Encoder Scale
 Removal of the protective film
3.

Mounting of the linear encoder
4.
scale.
Check  Encoder check
5.
Covers  Mounting of the covers.
6.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
© 2014 MIMAKI ENGINEERING CO.,LTD.
Work operation
Remove the Front cover M, L, Front undercover and car-
riage cover.
Peel off the protective film from the encoder.
Mount the linear encoder scale.
Pay attention to the location of the encoder PCB assy.
Carry out the encoder check to confirm it functions
normally.
Mount the covers that have been removed.
F/W ver. 1.00 Remark
Linear Encoder Scale
Description
Rev.
1.0
1
2
3
Ref.
6.1.1
6.3.5
4
4.3.6
5.1.12 5
6.1.1
6
7
8
3.2.4 R.1.0 P.1