MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Wiper Unit
Model
JV300-130/160
Issued 2014.05.30 Revised
6.3.6 Wiper Unit
Work procedures
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Wiper unit
© 2014 MIMAKI ENGINEERING CO.,LTD.
Wiper Unit
1. Remove the following covers.
2.
3. Remove two screws, and remove the Wiper unit from the base.
Screw
Remove tube
F/W ver
1.00
Remark
• Front cover M, L
Remove the screws, and remove the wiper unit from the base.
Take care not to contaminate the surroundings with
ink.
Rev.
1.0
1
2
3
4
5
6
7
8
6.3.6
R.1.0
P.1