Pointer Offset - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > POINTER OFFSET
Model JV300-130/160 Issued 2014.05.30 Revised

4.2.15 POINTER OFFSET

 Function
Print the adjustment pattern and adjust the location of the LED pointer and print origin (Nozzle A Column).
 Procedure
FUNCTION
#ADJUST [ENT]
#ADJUST
POINTER OFFSET [ENT]
© 2014 MIMAKI ENGINEERING CO.,LTD.
1. Select [#ADJUST] - [POINTER OFFSET].
2. Make necessary adjustments.
After drawing is completed
[], [], [], [] : LED pointer movement
LED Pointer
F/W ver. 1.00 Remark
[ENTER]: Starts drawing.
Align the LED pointer to the pattern position
shown on the left (intersection of the straight
lines).
[ENTER]: Settings
[END]: Cancellation of input
This function perform adjusting only once.
When drawing is performed, readjustment is
necessary because adjustment value is reset.
Rev.
1.0
1
2
3
4
5
6
7
8
4.2.15 R.1.0 P.1