Supply Cartridge Control And Selection; Supply Cartridge Control; Cartridge Status Indicated By Leds - MIMAKI JV300-130 Maintenance Manual

Hide thumbs Also See for JV300-130:
Table of Contents

Advertisement

MAINTENANCE MANUAL > Operating Principle > Ink System > Supply Cartridge Control and Selection
Model
JV300-130/160
Issued 2014.05.30 Revised

1.3.3 Supply Cartridge Control and Selection

 Supply cartridge control
No.
Item
1
For the 4-color ink set
M and Bl ink for the 6-color
ink set
2
Except M and Bl ink for the
6-color ink set
For the 8-color ink set
For the 6-color +W ink set
 Cartridge status indicated by LEDs
LED
Status
Blue
Lit
Red
Blink
Lit
 Selection and determination of the supply cartridge for the 4-color ink set
 supply cartridge switching selection timing
 At power-on
 When an error occurs in the currently selected cartridge
 When a cartridge with higher priority than the currently selected cartridge is inserted
 Switching is not executed during printing or cleaning but executed when the machine has returned to LOCAL
mode.
 When there is more than one effective cartridge for 1-ink supply path
Priority
1
The cartridge having the smaller amount of remaining ink is selected.
2
If there is no distinction at "1", the cartridge closer to the expiration date is selected.
3
If there is no distinction at "1" and "2", the cartridge in the smaller slot number is selected.
© 2014 MIMAKI ENGINEERING CO.,LTD.
 The machine uses two ink cartridges for 1 supply system and can mount 8 cartridges in
total.
 1 supply cartridge is assigned to 1 supply system. The cartridge with less amount of
remaining ink is used first by toggle switching.
 Switching between cartridges for ink supply occurs under any of the following
conditions:
• "INK END" during printing
• "INK NEAR END" during filling
• Ink IC warning
• When the cartridge is removed
• When executing Ink use-up cleaning
 Since there is 1 ink cartridge per supply system, all 8 cartridges are supply cartridges.
Supply cartridge
INK END, INK NEAR END, Expiration:1MONTH
 NO CARTRIDGE
 WRONG INK IC
Errors related to PIC, namely, NON-ORIGINAL INK, WRONG INK IC, Kind of INK, Color
of INK, WRONG CARTRIDGE and Expiration:2MONTH
 INK REMAIN ZERO
A cartridge having no remaining ink after execution of ink use-up cleaning (only in 4-color
use).
Cartridge status
F/W ver.
1.10
Remark
Description
Explanation
Rev.
1.0
1
2
3
4
5
6
7
8
1.3.3
R.1.0
P.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jv300-160

Table of Contents