X-Axis Motor Assy - MIMAKI JV300-130 Maintenance Manual

MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > X-axis Motor Assy
Model JV300-130/160 Issued 2014.05.30 Revised

6.3.1 X-axis Motor Assy

 Work procedures
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
X-axis motor Assy.
Connector
Remove spring
X-axis motor Assy.
Remove belt
© 2014 MIMAKI ENGINEERING CO.,LTD.
1. Remove the Cover L.
2. Remove the screws (x2) attached to the XM bracket.
3. Remove the X-axis motor connector.
4. Remove the Spring, and remove the XM bracket and X-axis
motor from the main unit.
XM bracket
5. Remove the screws (x3) attached to the XM bracket, and
remove the Belt and the X-axis motor Assy.
XM bracket
6. Reverse the disassembly procedure for reassembly.
F/W ver 1.00 Remark
X-axis Motor
The belt tension does not need to be adjusted.
Rev.
1.0
1
2
3
4
5
6
7
8
6.3.1 R.1.0 P.1