First Responder Configuration; First Responder Features; First Responder Steds Features; Responder Setup - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

9.1 First responder configuration

Configuring the MFD for First responders enables extra features that are otherwise not available
on the MFD. Several of the First responder features require a STEDs compatible AIS transceiver to
provide Sensitive Tactical Information Exchange and Display System (STEDS) functionality.
First responder and STEDS features require First responder to be selected as the 'Boating activity'
during step 2 of the MFD's initial startup wizard.
Note:
To change boating activity a factory reset must be performed to initiate the startup wizard.
STEDS specific features also require:
• an AIS5000 to be connected to the same NMEA 2000 / SeaTalkng ® network as the MFD.
Note: The AIS5000 must be correctly configured with an MMSI number and where required a
radio operators license must be obtained.
• each vessel must be configured with the same STEDS passphrase.
STEDS features use the existing Automatic Identification System (AIS) network to transmit and
receive messages and data but as the messages and data are encrypted they are not visible or
available to standard Class A and Class B AIS receivers/ transceivers.
Note:
On an MFD network only the Data master MFD needs to be configured.

First responder features:

The following features are available when the MFD is configured as 'First responder':
• The Responder settings menu tab is available and the Responder vessel type can be selected.
For details refer to: p.208 — Responder setup
• Data logging is enabled. For details refer to:
• DSC target tracking are enabled. For details refer to:
• Intel target tracking is available. For details refer to:
• LightHouse™ charts obstruction alarm is available For details refer to:
p.161 — Obstruction alarm (LightHouse charts)

First responder STEDS features:

The following STEDS features are available when the MFD is configured as 'First responder' and the
STEDS requirements have been met:
• The STEDS text messaging app is available: For details refer to:
• SITREP status can be configured. For details refer to:
• AIS restricted mode is available. For details refer to:
• Targets of Interest (TOI) feature is enabled. For details refer to:
• Search and Rescue (SAR) patterns can be received over STEDS messaging. For details refer to:
p.222 — SAR pattern receipt
• Blue Force tracking is used to identify other STEDS configured vessels. For details refer to:
p.220 — Blue Force Tracking

Responder setup

The Responder menu tab is only available when First responder is selected as the 'Boating activity'
during step 2 of the MFD's initial startup wizard. The Responder menu includes settings for STEDS
specific features, which require an AIS5000 to be connected to the system.
• Responder vessel type — Select your responder vessel type from a list.
• Boat name — Enter your vessel name (this option is also available in the Boat details menu).
• MMSI — Set your vessel's MMSI number.
208
p.210 — Data logging
p.213 — DSC targets
p.211 — Intel targets
p.222 — Messaging
p.220 — SITREP (Situation report)
p.219 — First responder AIS modes
p.214 — Target Of Interest (TOI)