Device Pairing; Pairing A Rmk Remote Keypad; Clear Pairing (Rmk); Pairing With A Quantum Radar Scanner - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

4.9 Device pairing

Pairing a RMK remote keypad

You can control your MFD with an RMK keypad.
From the This display tab of the Settings menu: Homescreen > Settings > This display .
1. Select Pair keypad.
2. Follow the onscreen instructions to pair your keypad.
Ensure you select the correct orientation for the keypad during the pairing process.
3. Repeat steps 1 and 2 on each MFD you want to control from your keypad.
Note:
Please refer to the controls section of your keypad's documentation for details on controlling
MFDs using a keypad.

Clear pairing (RMK)

1. Select Clear pairings to unpair ALL RMK keypads currently paired with the MFD.

Pairing with a Quantum Radar scanner

You can connect a Quantum Radar scanner to your MFD using Wi-Fi.
Pre-requisites:
• Ensure you have connected your Quantum Radar scanner in accordance with the instructions
provided with the Radar scanner.
• Ensure you know your Radar scanner's SSID and passcode.
1. Select Pair with Quantum from the This display tab: Homescreen > Settings > This display >
Pair with Quantum.
2. Follow the onscreen instructions to pair with your Quantum Radar.
The pairing process may take several minutes to complete.
For more information on the Quantum Radar pairing process (including troubleshooting
information), refer to the Quantum Radar Installation instructions documents.
Pairing a Bluetooth speaker
Before attempting to pair with a Bluetooth speaker, ensure that the speaker is switched on and
discoverable.
With your MFD's Bluetooth enabled:
1. From the Bluetooth settings page, select the relevant device from the Available devices list.
2. If requested, confirm the bluetooth pairing code.
If pairing is successful the speaker will appear in the Paired devices list and display the Connected
message.
Set up
57