Switching Sidebars; Enable Rudder Bar - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Table of Contents

Advertisement

Switching sidebars

Depending on connected devices and set up, various sidebars are available.
Data 1, Data 2 and Search sidebars are always available. The Race Start sidebar is available
when a sailing vessel boat type is selected during the initial start up wizard. The Audio sidebar is
available when compatible audio equipment is connected, and the Pilot sidebar is available when
autopilot control is enabled.
To switch sidebars:
1. Select the Sidebar selection icon.
2. Select the Sidebar you want to use.
3. You can also pin the Sidebar to the app using the pin icon.

Enable rudder bar

The Rudder bar is located at the bottom of the Sidebar, it displays the position of your vessel's rudder.
Note: A rudder position sensor must be on the same network as your MFD for the Rudder bar
to function.
To enable the Rudder bar:
1. Select the Sidebar selection icon.
2. Select Rudder bar to enable / disable its display at the bottom of the Sidebar.
28

Advertisement

Table of Contents
loading

Table of Contents