Configuration - Raymarine DSM300 Install Manual

20

1.7 Configuration

How you configure your DNT300 depends on the type of display to which you will
be connecting it.
Configuring the DSM300 with E Series Displays
The E Series system operates on the SeaTalk
RJ-45 modular connector. See Table 1-1 for a list of available E Series cables. When
the DSM300 is used with a single display, connection is made via a SeaTalk
Crossover Coupler.
E Series Display
Figure 1-11: Configuring an E Series System - Single Display
When used in a multiple display system, connect the DSM300 to the SeaTalk
Network Switch.
E Series Display
Figure 1-12: Configuring an E Series System - Multiple Displays
Crossover Coupler
SeaTalk hs Cable
E Series Display
SeaTalk hs Cable
hs
network, which uses cables with an
DSM300
E55060
SeaTalk hs Network Switch
E55058
SeaTalk hs Cable
DSM300 Installation Manual
DSM300
SeaTalk hs Cable
hs
hs