Uav Pre-Requisites - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Settings
Action if remote control signal is
lost:
Minimum height:
Return distance:
Height:
Distance:
Page settings
Settings
Data Overlays
Edit split ratio
Data overlays in the UAV app are separate from the Flight data information.

20.3 UAV pre-requisites

Before you can use the MFD's UAV app with your UAV you must have:
• set up your UAV in accordance with the instructions provided with the device.
• registered your UAV using the applicable DJI app (e.g.: DJI GO 4) on your mobile device.
• gained experience of launching, flying and retrieving your UAV.
• removed the RC cable from the side of your UAV's remote controller.
• ensured the remote controller is not in Sport mode.
• Created a UAV app page icon on the MFD's Homescreen.
376
Description
If your UAV loses connection to the remote controller then you
can select whether your UAV Hovers in its current location
or performs a Return to boat.
Specifies the minimum height of the UAV when performing
a Return to boat.
Specifies the distance from your vessel the UAV will reach
when performing a Return to boat.
Specifies the initial height of the UAV when performing a Fish
on / Circle me.
Specifies the initial distance from your vessel when performing
a Fish on / Circle me.
Description
Enables configuration of Data overlays
Enables you to customize the position of the partitions in
splitscreen app pages.