Raymarine LIGHTHOUSE 3 Advanced Operation Instructions page 272

AIS target status
Note:
When the MFD is configured as 'First responder' and is connected to STEDs compatible AIS
hardware, Blue Force AIS icons are used to identify other STEDs equipped vessels. For details
refer to: p.220 — Blue Force Tracking
AIS settings menu
You can configure AIS target settings from the AIS Settings menu: Menu > Targets > AIS Settings.
The following options are available:
• Show AIS targets in chart / Show AIS targets in Radar — Enables and disables display of AIS
targets in the Chart app / Radar app.
• Enhanced AIS targets — Enables and disables the display of enhanced AIS target icons.
• AIS names — When enabled, AIS target names are permanently displayed next to AIS target icons.
• Show these AIS types — Enables selection of the types of AIS target that will be displayed.
Available AIS types:
– All
– Dangerous
– Buddies
• Hide static targets — When enabled, AIS targets travelling under 2 knots will not be displayed,
unless it is or becomes dangerous.
• Silent mode (don't transmit my position) — When enabled, your vessel's AIS transceiver will not
transmit your position or details to other AIS equipped vessels.
272
Lost (No border,
crossed through)
Buddy (Yellow fill)
Dangerous (Flashes
Red)
Uncertain (Dashed
outline)
Dangerous and
Uncertain (Dashed
outline and Flashes
Red)
ATON off position (Red
border)