Demo Movie Requirements; Status Area; Status Area Icons; Pop-Over Menu Options - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Table of Contents

Advertisement

Selecting a Demo profile will provide your MFD with simulated data to help you practice operating
your display.
Important:
• It is recommended that Demo profiles are NOT activated whilst navigating.
• User data such as Waypoints, Routes, and Tracks is shared with all the other user profiles on the
MFD. This means that, for example, if you add or delete a waypoint while using a demo profile,
the change will also be reflected in all other user profiles on the MFD.
• Demo profiles will NOT display any real data, including safety warnings and messages.
• Any settings changes made will not affect User profiles.

Demo movie requirements

A demo movie file can be set to play when a demo profile is active and the MFD has not been
used for 60 seconds.
Demo movie files must be in the .mov file format and encoded using the H.264 video codec standard.
The Demo movie files must be saved to an external storage device connected to the MFD. Demo
movies are not shared across networked MFDs.
When the Demo movie feature is activated the system will search for a demo movie file associated
with the active demo profile. If an associated file cannot be found then the generic demo.mov is
played. See below for filename details.
Demo profile
General
Sailing
Cruising
Saltwater fishing
Freshwater fishing
Plays in all demo profiles if an associated demo
file is not found.
If an MFD is powered off with the demo movie active then the next time the MFD is powered on the
demo movie will play immediately after boot up.
Any interaction with the Touchscreen or physical buttons will stop the movie playing and return you
to the active demo profile.

5.6 Status area

You can view the status of connected peripheral devices using the MFD's Status area, located at
the top right of the Homescreen. This area also displays the Time and identifies when the MFD is
in Touchlock mode.

Status area icons

The status area provides icons which identify the status of connected Autopilot, AIS, Radar,
Sonar/Transducer, and Bluetooth devices.

Pop-over menu options

From the Options pop-over you can:
66
Associated filename
demo_general.mov
demo_sailing.mov
demo_cruising.mov
demo_salt.mov
demo_fresh.mov
demo.mov

Advertisement

Table of Contents
loading

Table of Contents