3
Steer to Hdg
Enables you to engage the autopilot in locked heading (Auto) mode.
4
Steer to Nav
Enables you to engage the autopilot in Navigation (Track) mode.
5
Pilot status
Provides the status of the autopilot.
6
Rudder bar
Provides visual indication of rudder position.
7
Heading
Displays your autopilot's current locked heading.
Selecting displays the Locked Heading adjustment pop-over.
8
–1°
Selecting will adjust your locked heading by minus 1 degree.
9
+1°
Selecting will adjust your locked heading by plus 1 degree.
10
–10°
Selecting will adjust your locked heading by minus 10 degrees.
11
+10°
Selecting will adjust your locked heading by plus 10 degrees.
12
Disengage
Selecting will disengage your autopilot.
13
Steer to Nav
Selecting will engage your autopilot in Navigation mode.
14
Pilot state
Displays the current state / mode of your autopilot.
15
Destination
Displays your current destination.
16
User customizable data
Displays user customizable data.
Select to customize data.
17
Advance wpt
Selecting will advance your destination to the next waypoint in the current route.
18
Stop Route / Stop Goto
Selecting will stop current navigation.
19
Restart here
Selecting will restart the cross track error (XTE) at your current location.
20
Disengage
Selecting will disengage your autopilot.
21
Steer to Hdg
Selecting will switch your autopilot to Locked heading mode.
22
Pilot state
Displays the current state / mode of your autopilot.
Autopilot control
105