Dsc Targets; Dsc Target Options - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

9.4 DSC targets

Waypoints created from DSC notifications will be displayed in the DSC target list and are displayed
onscreen at the originating vessel's reported position.
For details on creating a waypoint from a DSC notification see: p.82 — DSC VHF radio integration
DSC target symbols are static and remain in the reported position, however if a DSC position update
is received a new DSC waypoint symbol can be placed at the new location.
DSC targets will remain on the system until cancelled manually.
Accessing target options
Target specific options are available for targets that are currently being tracked. The target options
can be accessed from the target's context menu and from the Pop-over options in the relevant target
list. The options available are dependent on the type of target.
To access a target's context menu:
• Press and hold on the target onscreen, or
• Highlight the target onscreen using the Direction controls and press the OK button.
To access the target list Pop-over menu:
• Select the target in the relevant target list, or
• Highlight the target in the list using the Direction controls and press the OK button.

DSC target options

The following options are available for DSC targets.
• Designate TOI — If your MFD is configured for STEDS you can designate a target as a Target of
Interest (TOI). For details see: p.214 — Target Of Interest (TOI)
• Cancel Target — Cancels the DSC target and removes the DSC waypoint from the system.
• Intercept — Initiates a Target interception . For details see: p.163 — Target intercept
• Goto — Initiate navigation to the target position.
• Show on chart — Displays the target centered in the Chart app.
First responder
213