Axiom And Axiom Xl; Powering On The Display - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

1. Home — press to return to the Homescreen.
2. Menu — accesses menus. Press again to close menus.
3. UniController — provides a rotary control and a joystick that includes an OK push button for
using menus and applications.
4. Back — press to return to a previous menu or dialog level.
5. - (Minus/Negative symbol) — press to range out.
6. + (Plus/Positive symbol) — press to range in.
7. Active — press to switch the active pane, or to switch the active multifunction display (in multiple
display systems).
8. Waypoint / MOB — press and release to access the waypoint options. Press again to place a
waypoint. Press and hold to place a Man Overboard (MOB) marker at your current position.
9. Standby (Auto) — press to disengage integrated autopilot, press and hold to activate Auto
mode on integrated autopilot.
10. Power — see table below:
Configuration
Single MFD
Multiple MFDs
Note: MFDs that are powered off must be switched back on using the MFD's Power button.
11. Direction of Joystick Up.

4.2 Axiom and Axiom XL

Powering on the display

When power is available to the MFD but the MFD is switched off, the Power symbol will be illuminated.
To power on the display:
40
Display State
Off
On
All displays Off
All displays On
1 Display On and 1
display Off
Momentary press
Not applicable
Open Shortcuts page
Not applicable
Open Shortcuts page
on active display
Open Shortcuts page
on active display
Press and hold
Not applicable
Power off / put into
Standby
Not applicable
Power down all
displays
Power down active
display